Florida has no mold law for gym saunas. Sign the petition for a mandate.

Sign the Petition

Two Rules, One Dew Point: Keeping Humid Air and Cool Surfaces Apart

Energy Vanguard's Allison Bailes reduces humidity damage to two rules that are one rule read from both ends: keep humid air away from cool surfaces, and keep surfaces warm when they are in contact with humid air — both governed by the dew point, worked through a vented crawl space at a 75-degree dew point, a wall assembly, and a winter room at 70 degrees and 40 percent humidity whose dew point is 45.

Setting: houses — walls, crawl spaces, and windows; the gym application is ours and is labelled as such. Source score: 8/10. This page is our original summary of a published building-science article. It is general information, not legal or medical advice.

Source: Energy Vanguard, “Two Rules for Preventing Humidity Damage” — by Allison Bailes, founder of Energy Vanguard, published January 17, 2018 and updated December 1, 2021.

The dividing line: the dew point

The article starts where its predecessor on this shelf ended — with how water vapour interacts with materials — and reduces it to one temperature. Water vapour in air is pulled in by the materials in contact with that air, and temperature decides what happens: when a material’s temperature is above the dew point, there is no condensation; when it is below the dew point, condensation happens — and the colder the material, the more water vapour it pulls out of the air. That is the same physics a dehumidifier exploits on purpose, running humid air over a cold coil to condense water out of it. Inside a building’s fabric, the same event is what the author calls accidental dehumidification — water condensing on, or being absorbed into, bathroom windows, crawl-space band joists, or vinyl-covered walls — and it is generally not a good thing. (He flags his own simplification as he makes it: condensation is not the same as adsorption or absorption, and he points readers who want that distinction to his separate article on it. The simplification is labelled, not hidden — the posture this shelf keeps selecting for.) Everything after this paragraph is two ways of staying on the dry side of that line.

Rule 1 — keep humid air away from cool surfaces

The diagnostic the article prescribes, for plans or for a failure already built: find where the humid air is, and find what it is touching. Its worked example is the vented crawl space of the three-sources curation on this shelf, read now from the surface side: the humid air is in the crawl space, its dew point can be 75 degrees Fahrenheit or higher, and when the living space above is air-conditioned the floor over that crawl space can fall below that dew point — even at a 75-degree thermostat setting, parts of the floor can run cooler. Any wood or other material cooled by contact with the space above, reached by that crawl-space air, can then be, in his phrase, sucking up water from the humid air. Winter writes the same sentence in the other season: his photograph of a crawl space on a cold day — band joist, floor trusses, and subfloor all found by humid air while the house was still being framed, before the builder’s planned encapsulation and vapour barrier arrived in time to prevent the mess.

The fixes the article names for this geometry are separation fixes, and it is blunt about what does not count as one: fiberglass batts in the floor will not get you there. What will: encapsulate the crawl space and remove the humid air, or make sure the humid air never reaches a surface that might sit below the dew point, with closed-cell spray foam or an air barrier — usually rigid foam board — over the bottom of the floor joists. And the rule is not a crawl-space rule: the same separation question applies to every part of a house, because cool surfaces are made two ways — by air-conditioning the living space, and by outdoor weather.

Rule 2 — keep surfaces warm when they are in contact with humid air

The second rule, the author says himself, is really the first rule in reverse — technically its contrapositive. Where you have cool surfaces, keep humid air away (rule 1); where you have humid air, keep the neighbouring surfaces above the dew point (rule 2). His wall assembly walk — drywall, framing and cavity insulation, sheathing, cladding, from inside out — locates the summer risk precisely: the humid air is outdoors, insulated walls are unlikely to let siding or sheathing fall below the dew point unless the house is kept really, really cold, and the surface most likely to break the rule is the drywall — and if the problem is there, the failure is a rule 1 failure, a sheathing layer not acting as a good air barrier, as in the article’s lead photograph.

The more common rule 2 violation is the winter one, and he works its numbers the way this shelf works numbers: keep a home at 70 degrees and 40 percent relative humidity and the dew point is 45 degrees — air nobody would call humid, until it finds a surface below 45 degrees in winter, which makes it a potential moisture source all the same. Against that geometry the prescriptions are good insulation so the drywall stays warm, and good air sealing so humid indoor air cannot get into the wall and find cold sheathing. Then the limit he is careful not to skip: even those are not quite enough in cold climates, because water vapour also moves through a wall by diffusion, not only by air leakage — the answer there is continuous insulation outboard of the sheathing, which keeps the sheathing itself warmer (he points to Martin Holladay’s calculation of the minimum rigid-foam thickness, and notes newer codes now require continuous insulation in most climates), and, in double-stud walls, a vapour retarder to slow vapour’s movement toward the cold sheathing.

The closing calibration

The article ends by demoting its own subject, honestly: bulk water — bad flashing, stupid roof design, failing gutters — causes a lot more problems than water vapour does. (That is the same ordering as the three-sources triage: liquid first.) Still, vapour matters, and his closing image is the rule pair at domestic scale: on a cold winter day, somewhere, condensation is dripping down a bathroom window and mold is growing in a house with poorly insulated walls and unvented space heaters. If you can identify a problem as humid air meeting the wrong surface, there are exactly two ways to deal with it — keep the humid air away from the cool surfaces, or keep the surfaces warm. There is no third rule hiding behind these two; there is only a building, and a dew point, and which side of it each surface is on.

Why it matters here — the gym application, in our words

The article is about houses. A gym’s wet core is the same problem with the humid air turned up to industrial strength: a steam room and a sauna suite manufacture humid air on purpose, and the rooms around them supply the cool surfaces — exterior-wall tile in winter, air-conditioned locker-room walls, glass, ductwork and any surface cooled from the other side. Read through the two rules, a wet room has exactly two honest strategies, and most failing ones are attempting neither. Rule 1, separation: the humid air stays in the wet box — sealed envelope, exhaust that leaves the building instead of a shared return — which is why our Zero-Mold Sauna Blueprint isolates wet-zone air rather than recirculating it past cool surfaces elsewhere in the building. Rule 2, warm surfaces: the surfaces the humid air is allowed to touch stay above its dew point — insulated, unbridged, and never chilled from behind by an air-conditioned void. The failure photograph writes itself in either dialect: humid shower air leaking into a wall cavity and finding cold sheathing is the winter wall of this article with grout on it, and a cold, sweating locker-room wall in July is its drywall case — in both, the growth that follows is not a cleaning verdict first. It is a dew-point verdict: somebody’s surface was below the line, in humid air, for a long time. Cleaners do not move dew points. Assemblies do.

Tools for this job: Measure — moisture is the whole game

Pinless moisture meter

What it is: A handheld meter that reads moisture inside drywall, wood, and flooring through the surface — no pinholes, no damage. The tool that finds the wet wall behind the paint.

Why it is listed: Moisture readings are the hardest evidence to argue with. A dated photo of a meter reading on a wall turns a landlord dispute from opinion into documentation.

Its limits: Readings are relative and material-dependent — use them comparatively (wet spot vs. known-dry spot) and record both. A meter finds moisture, not mold.

Visit Pinless moisture meter →

Thermo-hygrometer / humidity data logger

What it is: A room thermometer-hygrometer; the logging kind records humidity over days and weeks instead of showing a single moment.

Why it is listed: A log beats a snapshot. Two weeks of humidity history above 60% is a document; a glance at a dial is an anecdote.

Its limits: Cheap sensors drift — sanity-check a new unit against a second one. Placement matters: measure where people live and sleep, not next to a shower door.

Visit Thermo-hygrometer / humidity data logger →

Some links in this strip are affiliate links and cost you nothing extra if you buy through one. As an Amazon Associate I earn from qualifying purchases. Affiliate money never buys scores, coverage, or silence — see our affiliate disclosure.

Read it at the source: Energy Vanguard — Two Rules for Preventing Humidity Damage.

If this happened to you

A wet room that sweats, streaks, or grows on the same wall every season? File a report with the rule pair in mind: which surfaces run cold, when they sweat, what is on the other side of that wall, and whether the room’s air is exhausted outside or shared. A surface below the dew point, documented with dates, is a building finding — not a housekeeping opinion.

Not professional advice. This page summarizes one published article’s account for general information. Building-specific moisture assessment belongs to building professionals.

THE NETWORK — ONE PUBLISHER, EVERY FRONT

Published by Bowman Web Services.

DearDougCollins.comThe VA, on the record. SelfGrowthVideos.comThe teachers, distilled. AllegedFraud.comFraud in America — alleged, documented. RecoveryTourism.comTravel to recover. TrumpTeamReport.comThe administration, documented. RFKTeamReport.comThe MAHA team, on the record.