Three Pipes Into One Wet Box: Why a Crawl Space Stays Humid and Grows Stuff
Energy Vanguard's Allison Bailes names the three moisture sources that keep a vented crawl space humid — bulk water standing in it, ground moisture evaporating up through the soil, and outdoor air entering through the vents and rising in relative humidity as it cools — and the growth rule underneath them: at 70% relative humidity or higher, mold has enough water. Fix the sources; a dehumidifier alone treats the symptom.
Setting: houses — vented crawl spaces in a humid climate; the gym application is ours and is labelled as such. Source score: 8/10. This page is our original summary of a published building-science article. It is general information, not legal or medical advice.
Source: Energy Vanguard, “3 Reasons Your Crawl Space Has High Humidity & Grows Stuff” — by Allison Bailes, founder of Energy Vanguard, first published May 10, 2011 and updated August 9, 2021, written from his years doing home-performance improvement work.
The growth rule the article starts from
The article opens on a floor joist furred with growth — “furries,” in a friend’s word the author quotes — and does something this shelf respects before anything else: the author states that he is not a mold expert and has not identified the growth as mold. What he then gives is the condition list, attributed to building science rather than to a laboratory: mold needs spores (everywhere), temperatures much like the ones people like (and colder — the article’s example is a refrigerator), food (organic matter, everywhere; cellulose in wood, and processed paper most of all — “mold candy,” in the field phrase he quotes), and moisture. Of the four, moisture is the only one a building operator actually controls, and the article puts a number on it: when the relative humidity of the air is 70% or higher, mold has enough water to grow. Keep materials and air dry enough, the argument runs, and there is no mold problem to remediate. His measurement habit, from his improvement work: a digital thermo-hygrometer with a remote sensor in the crawl space, so the occupants can track relative humidity instead of guessing at it — the same instrument-first posture as our moisture sources and humidity curation, applied below the floor instead of above it.
Measured, then, and found humid — where is the water coming from? The article’s answer is three sources, and the order matters: it is a triage, worst first.
Source one: bulk water
Standing water in the crawl space means, in the article’s plain fork, a drainage problem or a plumbing leak — and either way it is to be fixed immediately; a pond under a home is, in his words, a bad, bad idea. His worked example is a new house: the backyard sloped down toward the house, water stood against the foundation wall, the builder had put no waterproofing on the concrete block and had not graded the yard to keep hydrostatic pressure from building against it. The joists were already growing, and the fiberglass batt insulation was getting heavy and falling down. The lesson is sequencing: no vapor strategy survives liquid water arriving in bulk, and a building can be new and already failing this test.
Source two: the ground itself
A crawl space floor of exposed soil is a moisture evaporator running full-time. The article’s demonstration is a photograph with its own caption logic: where polyethylene partially covered the dirt, the uncovered soil looked dry and the covered soil was wet — because the dry-looking surface was dry precisely from constantly evaporating its moisture into the crawl space air. Foundation walls evaporate moisture inward as well. The fix the article prescribes is the unglamorous one: cover it all with a vapor barrier. A surface that looks dry is not evidence the ground is dry; on this account, it is evidence the ground is drying into the room.
Source three: the vents — outdoor air that gets wetter as it cools
The counterintuitive one, and the article knows it: bringing outdoor air in through crawl space vents raises the crawl space’s relative humidity instead of lowering it. The mechanism is pure psychrometrics, and he works the numbers: air enters and cools; cool air holds less moisture, so the same water content is now closer to saturation (the dew point). Air at 60% relative humidity at 90 degrees that cools to 75 degrees inside the crawl space lands at 95% relative humidity — over the 70% growth line by a margin, delivered by the very openings installed to dry the space. Ventilation is not drying when the incoming air’s dew point is above the surfaces it meets; it is irrigation. (Our how to avoid mold curation meets the same rule indoors: humid air plus a cool surface is condensation, and condensation is growth’s water supply.)
What the article says to do — and what it says does not work
Remove the causes, in order: bulk water by fixing the drainage or the plumbing; ground evaporation and vent air by encapsulating the crawl space — the sealed, barrier-lined conversion his linked work describes. And the explicit negative, carried here at the size he gives it: do not try to treat the symptom by installing a dehumidifier over unaddressed sources. A machine drying air that three sources keep re-wetting is a subscription, not a repair. His closing joke — keep kayaks down there if it gets bad enough — is a joke about exactly that failure order.
Why it matters here — the gym application, in our words
The article is about houses. A gym’s wet core sits in the same geometry more often than its drawings admit: ground-contact slabs, below-grade locker levels, and sealed under-bench cavities are a building’s crawl spaces with tile on them, and the article’s three-source triage transfers whole as a diagnostic order. Bulk water first — a failed drain, a leaking shower valve, a slab crack admitting groundwater will defeat every cleaning schedule written over it, and standing water is a finding, not a housekeeping note (see this week’s Gym Watch record from Sioux Falls, where a member reports exactly that, at review level). Ground and wall evaporation second — a wet room built on unsealed ground-contact construction re-wets itself between cleanings. Vent air third — humid outdoor or pool-deck air drawn across cooler wet-room surfaces is the vent mechanism wearing a commercial HVAC badge, and it is why our Zero-Mold Sauna Blueprint isolates wet-zone exhaust instead of sharing return air. And the measurement habit transfers first of all: a remote-sensor hygrometer logging the room’s humidity between visits is the cheapest dated record a member or a manager can keep — the difference between “it feels damp in here” and a number, at 70%, that the growth rule can be read against.
Tools for this job: Measure — moisture is the whole game
Pinless moisture meter
What it is: A handheld meter that reads moisture inside drywall, wood, and flooring through the surface — no pinholes, no damage. The tool that finds the wet wall behind the paint.
Why it is listed: Moisture readings are the hardest evidence to argue with. A dated photo of a meter reading on a wall turns a landlord dispute from opinion into documentation.
Its limits: Readings are relative and material-dependent — use them comparatively (wet spot vs. known-dry spot) and record both. A meter finds moisture, not mold.
Thermo-hygrometer / humidity data logger
What it is: A room thermometer-hygrometer; the logging kind records humidity over days and weeks instead of showing a single moment.
Why it is listed: A log beats a snapshot. Two weeks of humidity history above 60% is a document; a glance at a dial is an anecdote.
Its limits: Cheap sensors drift — sanity-check a new unit against a second one. Placement matters: measure where people live and sleep, not next to a shower door.
Some links in this strip are affiliate links and cost you nothing extra if you buy through one. As an Amazon Associate I earn from qualifying purchases. Affiliate money never buys scores, coverage, or silence — see our affiliate disclosure.
Read it at the source: Energy Vanguard — 3 Reasons Your Crawl Space Has High Humidity & Grows Stuff.
If this happened to you
A wet room that is cleaned on schedule and grows anyway — a locker room, a sauna, a ground-floor shower bank? File a report with the sources in the article’s order: standing water or leaks first, what the floor sits on second, where its air comes from third, and a humidity reading if you have one. Sources first is how a cleaning complaint becomes a building finding.
Not professional advice. This page summarizes one published article’s account for general information. Building-specific moisture assessment belongs to building professionals.